Amazon eero Pro 7 tri-band mesh Wi-Fi 7 router (newest model) – Supports internet plans up to 5 Gbps, Coverage up to 6,000 sq. ft., 3-pack by eero

I started to build a smart home less then 6 months ago. I used Xfinity XB8-T modem and router combo with speed of 1.1 Gbps download. It was an easy setup from my ISP to build a wi-fi network.

When using Alexa with about 30 devices on the combo gateway from Xfinity the Alexa AI at times started to act up, like confused.
Wi-Fi area is about 1500 sq ft. @ 60 feet x 25 feet and cameras outside at 15 feet from the building.
In the back is the router, the wi-fi reaching to the front of building where most of the devices are. The Xfinity had good range to connect devices using a TP wi-fi extender.

I started with one Eero Basic 7, and this was approved for my needs from the Eero.com Calculator, but only if I placed the router in the center of the building. With two new Earthnet Cables (Amazon Basic @ 50 ft) to move the router to the center of the building. I soon found out that wire placement was an ugly way to go. Also had two devices that seem to have weak wi-fi signal with the Basic Eero 7.
I then got a new Eero Pro 7, for Gateway and Eero Basic 7 for the satellite extender.

I am new to using personal routers other than the ISP combo pack.
When setting up my new Eeros, I had to move wires and modem for a new set up and testing.
I had some bad times with performance issues, I think Earthnet cables being moved from my previous set up caused bad connections and the RJ-45 connectors not setting good in the RJ-45 ports.

I have a SE-3 iPhone for apps and an older One Gbps earthen port gaming PC. I also upgraded my internet speed after buying into Eero System to over Two Gbps and these old devices are not able to show the true speeds of this router system or even what speeds my ISP provides. Old tech cannot go that fast. The Eero 7 system shows Download Speed @ 2.30 Gbps and 340 Gbps Upload.

RJ-45 connection needs to be sung in the RJ-45 ports for the best connection and speed. I had so much movement with the RJ-45 ports and connector clips I would lose my internet connection completely or have slow download speed on top of the time of day with Comcast ISP. So, my first review of the Eero Pro 7 was 3 stars, I removed the review after contact with the Eero Support Team, they do try to help you get the best system for your needs.

Eero Support recommended, I get a pair of Eero pro-7s instead of using the Eero Pro 7 as a Gateway and a Basic 7 as a satellite. It is recommended to set up satellites at 20 to 25 feet apart.

I got a new set of Earthnet Cat. 8 cables under 10 feet in length with new RJ-45 connectors that have a flange. The Flange holds the RJ-45 in place without any play or a sloppy connection. See Image of new RJ-45 in XB8-T RJ45 port. They are made for Servers Racks by the Brand: Cables Direct Online.

Since I placed the Pro 7 near the ceiling in the kitchen, (see photo) there is no Air Flow for Cooling, these Eeros do get warm. I found this AC Infinity Quiet 140mm USB Fan, UL-Certified. can be used on its side or flat down. I had to use it on the side as there is no room to place the Pro 7 on top of the fan. My other Pro 7 is on an air purifier.

I have seen testing done to compare Eero Pro to other top brands in the same price range, Eero Pro 7 won in latency on all tests, some by 50% faster.
For download speeds at a distance, the Eero pro 7 did not win but was not very far behind.

I now have 40+ devices, including TVs. The performance of one camera, Zumimall 5MP 5G is almost instance compared to a 1.5 second video lag I had before, sound still lags a bit. The other brand: Aosu cameras brings up the intrusion recorded video while it still going on if I click the notice. My cell phone is slower than the Eero 7 system when away from home. 3 cameras are AC power, one solar.

I also went with the Eero 7 system for the Device Controllers and Guest Wi-Fi. Took a hit on my budget, but I like the speed and new tech.

I still have problems with some brands of smart home devices, and I do not think it is because of the Eero 7 system, like eufy lock and Alexa.

Update 5-27-25

Upgraded to Philips Hue Bridge with 14 lights and 5 motion sensors @ sale prices of 35% to 40% off. What a huge improvement to my Eero Wi-Fi Speeds when testing, using Speedtest app.

I had 12 – 16 Wiz bulbs and sensors using wi-fi connection and Alexa. Wiz had vibration noise I could hear in each bulb, also showing device not connected in Alexa app and then Alexa would want to connect another Wiz bulb other than what I named it.
Using the Hue bridge with their lights and sensors, the eero app, wi-fi radio analytics, device interference went down by 15%.

Man, this Eero Pro 7 is the real deal. I was pulling my hair out with my old Orbi system, constantly dealing with slowdowns and dead spots in my NYC apartment. But seriously, after swapping it out for this Eero, my speeds have practically doubled, and I’ve got full coverage everywhere. You can even see the difference in the before and after photos I’ve attached.

Setup was a breeze, and I haven’t had a single drop or slowdown since. It’s just rock-solid. And get this: my iPhone 15 Pro and MacBook Air M3 aren’t even Wi-Fi 7 yet! So this Wi-Fi will be even faster once Apple upgrades their chips in the next generations. The only tiny thing is the price; it’s definitely an investment. But honestly, for the peace of mind and incredible performance, it’s totally worth it. So happy with this thing!