UTEBIT 2 Pack Mini Ball Head with 1/4″ Hot Shoe Mount Adapter Max Load 5.5lb 360° Swivel Tripod Ball Head for DSLR Camera Camcorder, Light Bracket by UTEBIT

(1171 customer reviews)

$9.99

$9.99

Customer Favorite — discover the UTEBIT 2 Pack Mini Ball Head with 1/4″ Hot Shoe Mount Adapter Max Load 5.5lb 360° Swivel Tripod Ball Head for DSLR Camera Camcorder, Light Bracket by UTEBIT, built for performance and designed for life in the United States.

About UTEBIT 2 Pack Mini Ball Head with 1/4″ Hot Shoe Mount Adapter Max Load 5.5lb 360° Swivel Tripod Ball Head for DSLR Camera Camcorder, Light Bracket

  • 【Versatility】☛Bottom: with 1/4″ screw hole, can be used with the removable 1/4″ hot shoe adapter (Package Includes) ☛Top:With 1/4″ screw, widely applicate for camera ,flash light, light stand, tripod etc. The combination of this mini ballhead and other light stands can be used as a Vive stand. Note: This package not includ light stand.
  • 【Multi-angle Use】360 degree panoramic rotation; 90 degree tilt rotation; Ball head diameter is about 23mm, and it can be fixed easily by locking knob for meeting different shooting angle.
  • 【With Locking Knob】 Aiming and horizon leveling can be easily accomplished. You also can use the knob to adjust to the desired angle to meet your needs at different angles.
  • 【Max Weight Capacity】5.5lb weight capacity; Material: plastic+metal; With rubber-padded mount on the top to protect your camera from potential scratches between your camera and the mounting part.
  • 【Light Weight & Portable】Weight: 0.18lb(85g) / Pc; Size:2.55in*0.67in*0.67in (65*17*17mm)/ Pc, small size and lightweight, easy to carry. Package includes:2 Pack mini ball head; 2* removable 1/4″ hot shoe adapter.

The UTEBIT 2 Pack Mini Ball Head with 1/4″ Hot Shoe Mount Adapter Max Load 5.5lb 360° Swivel Tripod Ball Head for DSLR Camera Camcorder, Light Bracket by UTEBIT combines reliability, modern design, and user-focused engineering. Perfect for everyday use, it delivers dependable results for American customers who value innovation.

Specification: UTEBIT 2 Pack Mini Ball Head with 1/4″ Hot Shoe Mount Adapter Max Load 5.5lb 360° Swivel Tripod Ball Head for DSLR Camera Camcorder, Light Bracket by UTEBIT

Product Dimensions

1.1 x 1.1 x 2.16 inches

Item Weight

5.6 ounces

Item model number

UTEIBT_MINI_BALL_HEAD_20MM_BK_2SET-EU

Is Discontinued By Manufacturer

No

Date First Available

November 11, 2018

Manufacturer

UTEBIT

Photos: UTEBIT 2 Pack Mini Ball Head with 1/4″ Hot Shoe Mount Adapter Max Load 5.5lb 360° Swivel Tripod Ball Head for DSLR Camera Camcorder, Light Bracket by UTEBIT

1171 reviews for UTEBIT 2 Pack Mini Ball Head with 1/4″ Hot Shoe Mount Adapter Max Load 5.5lb 360° Swivel Tripod Ball Head for DSLR Camera Camcorder, Light Bracket by UTEBIT

4.6 out of 5
8
1
1
0
0
Write a review
Show all Most Helpful Highest Rating Lowest Rating
  1. Tara Kearsing

    Ho acquistato il set di 2 mini teste a sfera UTEBIT per migliorare la flessibilità nel posizionamento della mia attrezzatura fotografica, e devo dire che si sono rivelate perfette per le mie esigenze! Realizzate in lega di alluminio, sono leggere ma allo stesso tempo estremamente robuste, supportando senza problemi il mio flash e la fotocamera DSLR, entrambi sotto il limite di carico di 2,5 kg.

    La rotazione panoramica a 360° e l’inclinazione fino a 90° offrono una versatilità incredibile durante le riprese. Mi è stato molto comodo utilizzare queste teste per catturare angolazioni difficili durante uno shooting all’aperto. La manopola di bloccaggio è facile da usare e mantiene tutto perfettamente stabile, anche su superfici non perfettamente piane.

    Un altro punto a favore è la compatibilità: grazie alla vite standard da 1/4″ e all’adattatore hot shoe incluso, ho potuto montarle sia sul mio treppiede che su un supporto per luci. La possibilità di cambiare configurazione rapidamente è stata davvero utile in diverse situazioni di ripresa.

    Infine, le dimensioni compatte e il peso ridotto (solo 85 grammi ciascuna) le rendono facili da trasportare, un grande vantaggio per chi, come me, si sposta spesso per sessioni fotografiche.

    In sintesi, questo set si distingue per qualità, versatilità e praticità. Se cercate un accessorio affidabile e ben progettato per la vostra attrezzatura fotografica, consiglio vivamente queste teste a sfera!

    Helpful(0) Unhelpful(0)You have already voted this
  2. R-man

    They seem sturdy enough and hold, however, the ball heads themselves showed signs of rust, I think it was in the warehouse for too long or wasn’t oiled enough.

    Also not smooth action on the balls probably do to the rust.

    For the price they are alright, solid construction. One knob controls both ball and base rotation btw so be careful when repositioning, hold on to the item/camera beforehand.

    Also the shoe adapter can be tighten.

    Helpful(0) Unhelpful(0)You have already voted this
  3. Jerry Saperstein

    I thought these would be good to use with a standard off camera flash but throughout the event the flash constantly sagged. Eventually after 5-6 uses the plastic cracked from over-tightening.

    Helpful(0) Unhelpful(0)You have already voted this
  4. Ryan

    These seem to do well. I’ve been using a few for webcams and Elgato lights. So far they’ve held up well, and feel solid. They’re definitely better than the stock mount. No complaints.

    Helpful(0) Unhelpful(0)You have already voted this
  5. R-man

    I bought this pair, not because I needed two, but because I wanted the larger size of these over the single 20mm Ball Head. I also didn’t buy these for photography use. I just needed a ballhead on my Monopod. I use a monopod to hold binoculars steady. I wanted the ballhead so I could point the binos toward a higher point, so I could watch birds of prey in the trees around our place. They both work like a charm. Some photographers may purchase these because they come with a hot shoe attachment. Let me tell you: The hot shoe attachment, isn’t hot. It is an attachment that will fit into the flash shoe on top of a camera. But it isn’t hot. You need to know that.

    Helpful(0) Unhelpful(0)You have already voted this
  6. Al N.

    Love these

    Helpful(0) Unhelpful(0)You have already voted this
  7. Arden

    I needed a ball head to hold a platform accessory on a mic stand. I didn’t want to spend a lot of money on something for so limited a purpose.

    I ordered these based on the reviews.

    They are much better made than I expected. They are rated for a payload of 5.5 pounds. I’m using it with about a three pound load and it works just fine.

    In all, these are really handy. The included cold shoes and the ¼-20 female socket make these extremely versatile.

    In my opinion, these are a great value and I highly recommend them.

    Jerry

    Helpful(0) Unhelpful(0)You have already voted this
  8. Ryan

    At the time of this review I found that these are the best value mount adapters available on amazon. The mounts are sturdy and hold to their tightened positions. I bought two 2-packs, and for under $20 in total it was a steal. I use 3 of my mount adapters for webcam lighting at my desk. Once installed I never have had to touch them again. The last adapter I use for my camera. It’s done well and I have had no issues since purchase.

    Helpful(0) Unhelpful(0)You have already voted this
  9. Larry

    Jag använder minikulhuvudet ihop med SMALLRIG Invisible Selfie Stick för Insta360, som också finns här på Amazon. En riktigt bra kombo till min DJI Osmo Pocket 3.

    Helpful(0) Unhelpful(0)You have already voted this
  10. Dan

    I took a gamble buying about the cheapest ball head on Amazon but I’m more than satisfied with them. Quality metal construction that feels precision though the thumbwheels and the knob for the ball lock are plastic as is the hot-shoe adapter. I don’t see much utility in using a ball head to hold a flash so everything I need out of a ball head is covered more than adequately. I like the fact that it is fairly low profile instead of long and skinny as well. (I know, That’s what she said.) Anyway, overall a great buy when purchased at $5 each, I’m ordering a couple of more sets because they’re cheap enough to spread around, like reading glasses. One pair for every room.

    Helpful(0) Unhelpful(0)You have already voted this

    Add a review

    Your email address will not be published. Required fields are marked *

    Last updated on October 19, 2025 5:52 am Details
    UTEBIT 2 Pack Mini Ball Head with 1/4″ Hot Shoe Mount Adapter Max Load 5.5lb 360° Swivel Tripod Ball Head for DSLR Camera Camcorder, Light Bracket by UTEBIT
    UTEBIT 2 Pack Mini Ball Head with 1/4″ Hot Shoe Mount Adapter Max Load 5.5lb 360° Swivel Tripod Ball Head for DSLR Camera Camcorder, Light Bracket by UTEBIT

    $9.99

    HotzyDeals
    Logo